Accuracy Assessment of Virtual Surgical Planning Comparing 3D Virtual Surgical Planning and Post-Operative CBCTs in Surgical Skeletal Class III Cases: A Retrospective Study

ABSTRACT Objective: To evaluate the accuracy of Virtual Surgical Planning (VSP) comparing VSPs and post-operative CBCT scans in patients undergoing bimaxillary orthognathic surgery of severe Skeletal Class III malocclusion. Material and Methods: Twenty-three patients (9 males and 14 females, mean age 24.1 ± 7.0 years) were selected and submitted to bimaxillary orthognathic surgery. Pre-operative VSPs and post-operative CBCTs were compared using both linear (taking into account four skeletal and six dental landmarks, each one described by the respective coordinates) and angular measures (seven planes in total). The threshold discrepancies for post-operative clinical acceptable results were set at ≤2 mm for liner and ≤4° for angular discrepancies. The mean difference values and its 95% confidence interval were identified, comparing which planned and which obtained in absolute value. Results: There were significant statistical differences for all absolute linear measures investigated, although only two overcome the linear threshold value of 2mm in both X and Y-linear dimensions. Linear deviations in Z-linear dimension do not reach statistical significance. All 12 angular measures reach the statistical significance, although none overcome the threshold angular value of 4°. Angular deviation for roll register the higher accuracy in contrast to pitch and yaw. Conclusion: Virtual surgical planning is a reliable planning method to be used in orthognathic surgery field; as a matter of fact, although some discrepancies between the planned on the obtained are evident, most of them meet the tolerability range.

Arch parameters and dental discrepancy (crowding and spacing) in a sample of an Afro-Colombian population / Parámetros de arco y discrepancia dental (apiñamiento y espaciamiento) en una muestra de población Afrocolombiana

The aim of this study was to determine the differences in arch length, inter-canine distance, inter-premolar distance, intermolar distance and arch shape between dental discrepancies (crowding and spacing) in a sample of dental casts from the Afro-Colombian population of San Basilio de Palenque. An analytical, cross-sectional study was conducted on a convenience sample of 63 subjects aged 11 to 57years, of Afro-Colombian origin, with full dentition from first molar to first molar, without extensive caries or restorations, and excluding casts with defects due to loss. The differences between arch (upper and lower) variables were analyzed according to dental discrepancies. Plaster models digitalized with a TR1OS3 Mono scanner with exactitude (6.9 ± 0.9 pm) and precision (4.5 ± 0.9 pm) were analyzed with Orthonalyzer software. Statistical analyses were done on SPSS software (Version 20 for Windows) and Real Statistics. Spacing discrepancy of68.25% was found for upper arch and 66.66% for lower arch; crowding discrepancy of 19.04% for upper arch and 20.63% for lower arch, and an adequate ratio of 12.69% for both arches. No statistically significant difference (p>0.05) was found between arch parameters except for inter-premolar distance on the lower arch. The most frequent arch shape in the population was oval for both upper arch, with 76.19%, and lower arch, with 71.42%. Tooth size was larger in males than females but the difference was not statistically significant.

El objetivo de este estudio fue determinar las diferencias en longitud de arco, distancia intercanina, interpremolar, intermolar y la forma de arco entre discrepancias dentales (apiñamiento y espaciamiento), en una muestra de modelos dentales de la población afrocolombiana de San Basilio de Palenque. Se realizó un estudio analítico transversal, en una muestra por conveniencia de 63 sujetos con un rango de edad entre 11 y 57 años, de origen afrocolombiano, quienes tuvieron dentición completa de primer molar a primer molar, sin caries extensas, ni restauraciones; se excluyeron los modelos con defectos por el vaciado. Se analizaron las diferencias entre las variables de los maxilares (superior e inferior) con las discrepancias dentales. Se utilizaron modelos de yeso que fueron digitalizados con el escánerTR1OS3 Mono con una exactitud de (6.9 ± 0.9 pm) y una precisión de (4.5 ± 0.9 pm)y analizados con el software Orthonalyzer. Los análisis estadísticos se llevaron a cabo utilizando el software SPSS (Versión 20 para Windows) y Real Statistics. Se encontró una discrepancia de espaciamiento de un 68,25% para el arco superior y 66,66% en el arco inferior; y una discrepancia de apiñamiento en el arco superior de 19,04% e inferior de 20,63% y una relación adecuada de 12,69% para los dos arcos. No se encontraron diferencias estadísticamente significativas (p>0.05) en los parámetros de arco a excepción de la distancia interpremolar del arco inferior. La forma de arco más frecuente en la población fue ovalada tanto en el arco superior con un 76,19% como en el arco inferior con un 71,42%. En cuanto al tamaño dental, se presentó mayor tamaño en los hombres que en las mujeres, pero este no fue estadísticamente significativo.

Developmental association of palatal dimensions and palatal rugae characteristics in Angle´s classes I, II and III of malocclusion / Asociación de desarrollo de las dimensiones palatinas y las características de las rugas palatinas en las clases I, II y III de maloclusión de Angle

During development, bony changes in the palate are reflected in the palatal rugae. Therefore, we hypothesized that the palatal dimensions (PD) influence the shape and number of palatal rugae (PR). The objectives were to record the palatal rugae characteristics (PRC) and palatal dimensions (intercanine distance (ICD), intermolar distance (IMD), palatal height (PH) and palatal area (PA) in Classes I, II and III malocclusion patients and investigate their interrelationship, and statistically examine the possibility of predicting PRC with the PD. Four hundred eighty-one pre-orthodontic study casts of healthy patients with normal palate anatomy were grouped as Classes I, II and III and scanned using 3D cast scanner. The PRC, ICD, IMD, PH, and PA were recorded digitally using 3D enabled software. The data was statistically analyzed. A strong statistically significant difference was observed between PA and number of straight and wavy rugae. ICD and the number of straight rugae were also related. A weak correlation exists between malocclusion classes and PA. The remaining rugae characteristics did not exhibit any relation with palatal dimensions. PA is positively related to the number of straight rugae and negatively related to the number of wavy rugae. Bigger palates have more straight rugae and less number of wavy rugae. A weak correlation between PA and Angle's class I malocclusion exists. We also propose that PA has a developmental association with the number and shape of PR.

Durante el desarrollo, los cambios óseos en el paladar se reflejan en las rugas palatinas. Por lo tanto, planteamos la hipótesis de que las dimensiones palatinas influyen en la forma y el número de las rugas palatinas. Los objetivos fueron registrar las características de las rugas palatinas y las dimensiones palatales (distancia intercanina, distancia intermolar, altura palatina y área palatina) en pacientes con maloclusión de clases I, II y III e investigar su interrelación, y examinar estadísticamente la posibilidad de predecir las características de las rugas palatinas con las dimensiones palatinas. Cuatrocientos ochenta y un estudios pre-ortodónticos de pacientes sanos con anatomía normal del paladar se agruparon como Clases I, II y III y se escanearon con un escáner de emisión 3D. La distancia intercanina, distancia inter molar, altura palatina y área palatina se registraron digitalmente utilizando el software 3D. Los datos se analizaron estadísticamente. Se observó una diferencia estadísticamente significativa entre la altura palatina y el número de rugas rectas y onduladas. Se registró también la distancia intercanina y el número de rugas rectas. Existe una correlación débil entre las clases de maloclusión y la altura palatina. Las características restantes de las rugas palatinas no mostraron ninguna relación con las dimensiones palatinas. El área palatina está relacionada positivamente con el número de rugas rectas y negativamente relacionada con el número de rugas onduladas. Los paladares más grandes tienen más rugas rectas y menor cantidad de rugas onduladas. Existe una correlación débil entre el área palatina y la clase I de maloclusión de Angle. También proponemos que el área palatina tiene una asociación de desarrollo con el número y la forma de rugas palatinas.

Mandibular anterior crowding: normal or pathological?

ABSTRACT The teeth become very close to each other when they are crowded, but their structures remain individualized and, in this situation, the role of the epithelial rests of Malassez is fundamental to release the EGF. The concept of tensegrity is fundamental to understand the responses of tissues submitted to forces in body movements, including teeth and their stability in this process. The factors of tooth position stability in the arch - or dental tensegrity - should be considered when one plans and perform an orthodontic treatment. The direct causes of the mandibular anterior crowding are decisive to decide about the correct retainer indication: Should they be applied and indicated throughout life? Should they really be permanently used for lifetime? These aspects of the mandibular anterior crowding and their implication at the orthodontic practice will be discussed here to induct reflections and insights for new researches, as well as advances in knowledge and technology on this subject.

RESUMO Os dentes ficam muito próximos quando estão apinhados, mas suas estruturas permanecem individualizadas e, nessa situação, o papel dos restos epiteliais de Malassez é fundamental para liberar o EGF. A tensigridade é um conceito chave para compreender as respostas dos tecidos submetidos às forças nos movimentos corporais, incluindo os dentes e sua estabilidade nesse processo. Os fatores da estabilidade de posição de um dente na arcada dentária — ou tensigridade dentária — devem ser considerados quando se planeja e finaliza um caso na prática clínica ortodôntica. As causas diretas do apinhamento dentário anteroinferior são determinantes para se refletir se a contenção deve ser mesmo indicada e aplicada por toda a vida e se, necessariamente, deve ser usada de forma permanente. Esses aspectos do apinhamento dentário anteroinferior e suas implicações na prática clínica serão aqui abordados para induzir reflexões e insights de novas pesquisas, bem como avanços no conhecimento e tecnologia sobre esse assunto.

Palatal rugae characteristics and its relationship with Angle class 1, 2 & 3 malocclusions / Características de rugas palatinas y su relación con ángulos de maloclusiónes clase 1, 2 & 3

SUMMARY: The objectives of the study were to, 1. Compare the accuracy of four methods of acquisition of palatal rugae (PR) characteristics (PRC). 2. Study the predominant PRC in Angles Class 1, 2, and 3 malocclusions. 3. To statistically correlate the predominant PRC with Class 1, 2 & 3 malocclusions and thus explore the possibility of utilizing it in predicting malocclusions. Study casts and intraoral 3D scan images (3Shape® Intra-Oral Scanner) of the palate of 104 healthy orthodontic patients were included as Group I and Group II respectively. The casts of Group I were scanned using 3Shape® (Group III) and Sirona inEos X5® (Group IV) cast scanners. PRC for all groups were recorded and PRC of Group I was compared with PRC of Groups II, III and IV for possible matching. 3D images of Group IV were further divided according to Angles classification and predominant PRC analyzed. 97.8 % of PRC match was observed in Group I and Group IV. Wavy and complex rugae were predominant in Class 1 and 3 malocclusions and showed statistically significant difference between Class 1, 2 and 3 malocclusions (p=0.00 and 0.014 respectively) with wavy being higher in Class 1 and complex being higher in Class 3 (LSD Post Hoc analysis). Direct intraoral 3D scanning and 3D scanning of the palatal area of casts are equally reliable methods for PR acquisition for examining PRC. All PRC considered together have a minimal impact on prediction of malocclusions, however, influence of wavy characteristic was maximum.

RESUMEN: Los objetivos del estudio fueron los siguientes: 1. Comparar la precisión de cuatro métodos de adquisición de las características de la rugosidad palatina (CRP). 2. Estudiar las CRP predominantes en maloclusiones clases 1, 2 y 3. 3. Correlacionar estadísticamente las CRP predominantes con maloclusiones clase 1, 2 y 3 e investigar la posibilidad de utilizarlas en la predicción de maloclusiones. Se incluyeron en el Grupo I y en el Grupo II, los moldes de estudio y las imágenes de barrido 3D intraoral (3Shape® Intra-Oral Scanner) del paladar de 104 pacientes ortodónticos sanos. Los escaneos del Grupo I se escanearon utilizando escáner fundidos 3Shape® (Grupo III) y Sirona inEos X5® (Grupo IV). CRP para todos los grupos se registraron y CRP del Grupo I se comparó con las CRP de los Grupos II, III y IV para una posible coincidencia. Las imágenes 3D del Grupo IV se dividieron de acuerdo con la clasificación de ángulos y las CRP predominantes analizadas. Se observó un 97,8 % de concordancia en CRP en los grupos I y IV. Las rugas onduladas y complejas predominaron en las maloclusiones de Clases 1 y 3 y mostraron diferencias estadísticamente significativas entre las maloclusiones de Clases 1, 2 y 3 (p = 0,00 y 0,014 respectivamente), siendo el ondulado más alto en la Clase 1 y el complejo en la Clase 3 (LSD Post Hoc). El escaneo 3D intraoral directo y el escaneado 3D del área palatal son métodos igualmente confiables para la adquisición de CRP para el examen de las CRP. Todas las CRP consideradas en conjunto tienen algún grado de impacto en la predicción de las maloclusiones, sin embargo, fue mayor la influencia de la característica ondulada.

Influence of the cranial base flexion on Class I, II and III malocclusions: a systematic review

ABSTRACT Objective: The aim of this study was to perform a systematic review on the morphological characteristics of the skull base (flexion, anterior length and posterior length) and the concomitant development of malocclusions, by comparing differences in dimorphism, ethnicity and age. Methods: The articles were selected by means of electronic search on BBO, MEDLINE and LILACS databases from 1966 to 2016. A qualitative evaluation of the methodologies used on the articles was also performed. Results: Although the literature on this topic is abundant, only 16 articles were selected for the present systematic review. The cranial base angle itself does not seem to play a significant role in the development of malocclusions. In fact, the cranial base angle is relatively stable at the ages of 5 to 15 years. Conclusions: A more obtuse angle at the skull base, in association or not with a greater anterior length of the cranial base, can contribute to the development of Class II division 1 malocclusions. On the other hand, a more acute angle at the skull base can contribute to a more anterior positioning of the mandible and to the development of Class III malocclusions.

RESUMO Objetivo: o objetivo desse estudo foi realizar uma revisão sistemática sobre as características morfológicas da base do crânio (flexão, comprimento anterior e comprimento posterior) e o desenvolvimento concomitante da má oclusão, comparando as diferenças do dimorfismo, etnia e idade. Métodos: os artigos foram selecionados por meio de busca eletrônica nas bases de dados BBO, MEDLINE e LILACS, de 1966 a 2016. Uma avaliação qualitativa da metodologia dos artigos também foi executada. Resultados: ainda que a literatura seja abundante nesse assunto, somente 16 artigos foram selecionados para a presente revisão sistemática. O ângulo da base do crânio, por si só, não parece desempenhar papel significativo no desenvolvimento das más oclusões. De fato, o ângulo da base do crânio é relativamente estável dos 5 aos 15 anos. Conclusões: um ângulo mais obtuso na base do crânio, associado ou não a um comprimento maior, pode contribuir para o desenvolvimento da má oclusão de Classe II, divisão 1. Por outro lado, um ângulo mais agudo na base do crânio pode contribuir para um posicionamento mais anterior da mandíbula e para o desenvolvimento da má oclusão de Classe III.

Incidence of Lower Anterior Third Molars on Dental Crowding. A New Approach / Incidencia de Terceros Molares Inferiores en el Apiñamiento Dental. Un Nuevo Enfoque

ABSTRACT: This paper main objective is to estimate the level of association between lower anterior crowding and the presence of lower third molars on study models and panoramic dental radiographs of patients treated by the Orthodontics Postgraduate Students at the Dentistry Faculty at the University of Cartagena (Cartagena de Indias, Colombia) and also other dental and radiographs care centers in Cartagena de Indias. It was made using a cross-sectional study at the Dentistry Faculty at the University of Cartagena and others dental care centers in the city. There were 366 study models and panoramic dental radiographs selected by strict inclusion/exclusion criteria for patients. An instrument that includes age, gender, presence or absence of third molars, position of third molars according to Winter's classification, stage of formation of the third molars according to Nolla's classification, and crowding magnitude according to Harfin's classification was used. Data were analyzed based on frequency distributions and proportions; inferential analysis was performed through proportional odds model using the software package IBM SPSS Statistics v23. It was found that the patients with Nolla 6 from the right side are more likely to have mild-moderate crowding magnitude than patients with Nolla 10 on that same side. In conclusion, this research provides as main result the implication of the eruption of the lower third molars and particularly those erupting in mesioangular and horizontal positions in the anterior crowding (AA).

RESUMEN: El objetivo de este trabajo fue estimar el nivel de asociación entre el apiñamiento dentario anteroinferior y la presencia de terceros molares inferiores en modelos de estudio y radiografías panorámicas de los pacientes atendidos por estudiantes del posgrado de ortodoncia de laFacultad de Odontología de Cartagena de Indias, Colombia y también otros centros dentales y de radiografías en Cartagena de Indias. Se realizó un estudio transversal en la Facultad de Odontología de la Universidad de Cartagena y otros centros de atención odontológica de la ciudad. Se utilizaron 366 modelos de estudio y radiografías dentales panorámicas seleccionadas por estrictos criterios de inclusión / exclusión para los pacientes. Se utilizó un instrumento que incluía edad, sexo, presencia o ausencia de terceros molares, posición de los terceros molares de acuerdo con la clasificación de Winter, etapa de formación de los terceros molares de acuerdo con la clasificación de Nolla y magnitud de apiñamiento según la clasificación de Harfin. Los datos se analizaron en base a las distribuciones y proporciones de frecuencia; el análisis inferencial se realizó a través del modelo de probabilidades proporcional utilizando el software IBM SPSS Statistics v23. Se encontró que los pacientes con Nolla 6 en el lado derecho son más propensos a tener una magnitud de apiñamiento de leve a moderada en comparación a los pacientes con Nolla 10 en ese mismo lado. En conclusión, esta investigación proporciona como resultado principal la implicación de la erupción de los terceros molares inferiores y particularmente aquellos que erupcionan en posiciones mesioangulares y horizontales en el apiñamiento dentario anterior (AA).

Stature Estimate by the Upper Arch: Carrea´s Method Modified / Estimación de la Estatura por Medio del Arco Superior: Método de Carrea Modificado

The Carrea's index is an alternative to estimate the human stature. However, in cases when the jaw is affected, this technique becomes impracticable. Expanding the use of the Carrea's index, by extending it to the upper elements, would increase the chances of the method, especially in cases when only the skull is available for analysis. The aim of the study was to test a new denominator for Carrea's index, so that it could be used for the upper arch, aiming at a new feature to estimate human stature. Plaster models of the arch and the string of the upper arch of 107 dentistry students, aged between 18 and 30 years, previously submitted to anthropometric analysis, were measured with a digital caliper. The data found were inserted in software developed to find a denominator that would result in a higher number of correct answers to real statures, evaluating the left and the right hemiarch, and their average. For the right hemiarch, the denominator with more accuracy for the real stature was the interval from 2.573 to 2.583, with 58.9 %. For the left hemiarch, the best values were from 2.553 to 2.554 with 63.6 %. The average of hemiarchs had as ideal denominator values between 2.579 and 2.581, with 60.7 %. We found no significant statistical difference between denominators. It was possible to obtain a new denominator to apply Carrea's index for the upper arch. The new method had satisfactory accuracy rate and should be tested in other populations to verify its applicability.

El índice de Carrea constituye una alternativa para la estimación de la estatura humana. Sin embargo, esta técnica se torna inviable cuando la mandíbula se encuentra comprometida. Su aplicación a partir de elementos dentales superiores, resultaría de utilidad en los casos en que sólo se dispusiese del cráneo para examinar. El objetivo del estudio fue proponer un nuevo denominador para que el índice de Carrea pueda ser utilizado para el arco superior, en la búsqueda de otro recurso para estimar la estatura humana. El arco y la cuerda fueron medidos, con un calibre digital, sobre los respectivos modelos de yeso superiores de 107 estudiantes de Odontología, que tenían entre 18 y 30 años de edad y habían sido sometidos a análisis antropométricos previos. Los datos obtenidos fueron analizados matemáticamente mediante un programa desarrollado para encontrar un denominador, que proporcionase un mayor número de aciertos para las estaturas reales, evaluando el hemiarco derecho, izquierdo y la media de los hemiarcos. Para el hemiarco derecho, el denominador más apropiado para la estatura real correspondió al intervalo 2,573-2,583, con 58,9 % de acierto. Para el hemiarco izquierdo, los mejores valores quedaron comprendidos entre 2,553 y 2,554, con 63,6 % de acierto. La media de los hemiarcos determinó guarismos ideales, oscilantes entre 2,579 y 2,581, con 60,7 % de acierto. No hubo diferencia estadísticamente significativa entre los denominadores hallados. Se obtuvo un nuevo denominador, que permitió el empleo del índice de Carrea para el arco superior, con una tasa de acierto satisfactoria. No obstante, este método debe ser probado y validado para otras poblaciones, verificando su aplicabilidad.

Postura craneocervical como factor de riesgo en la maloclusión / Craniocervical posture as a risk factor for malocclusion

Introducción: los trastornos de la postura craneocervical han sido asociados como factores de riesgo de las enfermedades ortopédicas y, a su vez, son considerados afecciones propias, pero no existen suficientes estudios que los relacionen con la maloclusión dental. Objetivo: determinar si los trastornos de la postura craneocervical constituyen un factor de riesgo en la maloclusión de los pacientes atendidos en la Clínica Victoria de Santa Clara en el período comprendido entre octubre de 2012 y febrero de 2013. Métodos: se realizó un estudio observacional descriptivo de corte transversal donde se formaron 2 grupos, uno con pacientes con maloclusión y otro sin maloclusión, cada uno con 90 pacientes. Para determinar la prevalencia de los trastornos de la postura craneocervical, se emplearon la prueba de convergencia ocular, la prueba de rotación de la cabeza y la alteración del plano biclavicular. Resultados: en el grupo con maloclusión prevalecieron las féminas (55,55 por ciento); los principales factores identificados correspondieron a la herencia (85,55 por ciento), hábitos deformantes (63,33 por ciento), pérdida prematura de dientes (43,33 por ciento) y anormalidades de la musculatura bucal (24,44 por ciento). La prevalencia de los trastornos posturales fue del 97,77 por ciento en el grupo con maloclusión contra el 48,88 por ciento del control; tuvo una relación muy altamente significativa con la maloclusión y un odd ratio de 46,00. Conclusiones: existe un predominio del sexo femenino en el grupo de pacientes con maloclusión y una prevalencia del sexo masculino en el grupo control. Los principales factores de riesgo relacionados con la maloclusión de forma muy altamente significativa son los de mayor prevalencia. Hay predominio de los trastornos de la postura craneocervical en el grupo con maloclusión, presentando una relación muy altamente significativa con esta enfermedad, lo cual constituye un factor de riesgo que incrementa 46 veces más el riesgo de padecer de maloclusión(AU)

Introduction: craniocervical posture disorders have been viewed as risk factors for orthopedic conditions and as separate conditions themselves, but there are not sufficient studies relating them to dental malocclusion. Objective: determine whether craniocervical posture disorders constitute a risk factor for malocclusion in patients cared for at Victoria de Santa Clara clinic from October 2012 to February 2013. Methods: an cross-sectional observational descriptive study was conducted for which two groups were formed: one with patients with malocclusion and the other with patients without malocclusion. Each group was composed of 90 patients. Ocular convergence, head rotation, and biclavicular plane alteration tests were used to determine the prevalence of craniocervical posture disorders. Results: female gender prevailed in the malocclusion group (55.55 percent). The main factors identified were inheritance (85.55 percent), deforming habits (63.33 percent), premature tooth loss (43.33 percent) and oral muscle anomalies (24.44 percent). Prevalence of posture disorders was 97.77 percent in the malocclusion group vs. 48.88 percent in the control group, with a highly significant relationship to malocclusion and an odd ratio of 46.00. Conclusions: female gender prevailed in the malocclusion group, whereas male gender predominated in the control group. The most prevalent risk factors are those related to malocclusion in a highly significant manner. A predominance was found of craniocervical posture disorders in the malocclusion group, with a highly significant relationship to malocclusion, a factor increasing 46 times the risk of suffering from the condition(AU)

Occlusal and cephalometric characteristics of anterior open-bite among Colombian 5-10 years old school children / Características oclusales y esqueléticas de mordida abierta anterior en escolares colombianos de 5 a 10 años

Abstract: objetive. The aim of this study was to determine oclussal and skeletal characteristics of anterior open bite (AOB) according to sex and socioeconomic status (SES) in school children in the municipality of Pasto, Colombia. Methodology. A cross-sectional study was carried out involving 384 children between 5 and 10 years of age. A clinical assessment was performed to evaluate AOB, and information regarding socio-demographic variables, such as sex and SES according to Colombian standards, was obtained. Standardized lateral cephalograms and cast models were taken from participating subjects. A statistical analysis was performed using frequencies, percentages, t-student, ANOVA, Mann-Whitney and Kruskal-Wallis tests. Results. Prevalence of AOB was 8.1 percent, showing a significant difference according to SES. The most common Angle’s classification was Class II with 70.6 percent in the right molars, and 58.8 percent in the left molars, according to occlusal characteristics. Statistically significant differences were observed in the ratio of posterior and anterior facial height (PFH:AFH) (p=0.050) according to sex. The distance between the upper first molar and palatal plane (U6-PP) (p=0.028), the Overbite (p=0.032) and Gonial° (p=0.033) values showed statistically significant differences according to SES in vertical skeletal measures. The 64.7 percent of AOB were of dental origin. Conclusion. Results suggest variations in some vertical skeletal measures according to sex and SES in children with AOB. Since a high percentage of AOB is caused by dental factors, preventive programs are required to control this condition.

Resumen: el objetivo de este estudio fue determinar las características oclusales y esqueléticas de mordida abierta anterior (MAA) según sexo y nivel socioeconómico en escolares de Pasto, Colombia. Metodología. Se diseñó un estudio transversal con la participación de 384 niños entre 5 y 10 años. Se realizó una valoración clínica para evaluar la MAA y se obtuvo información sobre variables socio-demográficas como edad, sexo y estrato socioeconómico (ESE) basado en los parámetros de Colombia. A los participantes se les tomó cefalometrías laterales estandarizadas y modelos de estudio de yeso. Se hizo un análisis estadístico usando frecuencias, porcentajes, t-student, ANOVA, Mann- Whitney y Kruskal-Wallis. Resultados. La prevalencia de MAA fue 8,1 por ciento y existió una diferencia significativa según ESE. La clasificación de Angle más común fue la Clase II para el molar derecho en 70,6 por ciento e izquierdo: en 58,8 por ciento de acuerdo a las características oclusales. Diferencias estadísticamente significativas fueron observadas en la razón entre la altura facial posterior y anterior (PFH: AFH) según sexo (p=0,05). Los valores de la distancia entre el primer molar superior y el plano palatino (U6-PP) (p=0,028), el Overbite (p=0,032) y Gonial° (p=0,033) tuvieron una diferencia estadísticamente significativa con respecto al ESE en las medidas esqueléticas verticales. El 64,7 por ciento de MAA fueron de origen dental. Conclusión. Los resultados sugieren variaciones en algunas medidas esqueléticas verticales según sexo y ESE. Debido a que existe un alto porcentaje de MAA dental, se requieren programas preventivos para controlar esta condición.

Occlusal changes secondary to temporomandibular joint conditions: a critical review and implications for clinical practice

ABSTRACT The relationship between Temporomandibular Disorders (TMD) and malocclusion is an extremely critical issue in dentistry. Contrary to the old concept that malocclusion causes TMD, occlusal changes, especially those observed as sudden, may be secondary and reflect joint or muscle disorders due to the obvious connection between these structures and the dental occlusion. Objectives The aim of this article is to present the most commonly occlusal changes secondary to TMD. Methods The clinical presentation of these conditions is discussed. Details regarding diagnosis, treatment, and follow-up of patients presenting TMD prior or during treatment are also presented. Conclusions All plans for irreversible therapy should be preceded by a meticulous analysis of TMD signs and symptoms in such a way that patients are not submitted to irreversible treatment, based on an untrue occlusal relationship, secondary to articular and/or muscular disorders. When present, TMD symptoms must always be controlled to reestablish a “normal” occlusion and allow proper treatment strategy.

Fotografía 2D en el diagnóstico de asimetrías faciales / 2D photography in facial asymmetry diagnosis

El objetivo de esta investigación es identificar la relación entre la asimetría facial y la pérdida de contacto en línea mediana entre dientes maxilares y mandibulares. Se realizó un estudio descriptivo en 18 sujetos portadores de asimetría facial que consultaron en la División de Cirugía Oral y Maxilofacial de la Universidad de La Frontera por tratamiento quirúrgico de la asimetría. En todos ellos se evaluó la presencia y grado de la asimetría facial y la presencia y desvío desde la línea mediana facial del punto mediano mandibular y maxilar mediante la prueba estadística t de student considerando un valor de p <0,05; todas las evaluaciones fueron realizadas mediante fotografías 2D de rostro y dientes obtenidas en condiciones estandarizadas. Se identificó que todos los sujetos portadores de asimetría facial presentaron asimetría dentaria; los desvíos dentarios fueron de casi 7 mm y existió relación estadísticamente significativa entre desvío facial y desvío dentario. Se concluye que los sujetos con asimetría dentaria pueden presentar asimetría facial de forma que la evaluación esqueletal del rostro es necesaria para realizar un diagnóstico correcto.

The aim of this research was to find the relation between facial asymmetry and loss of continuity in median line of maxillary and mandibular teeth. A descriptive study was carried out in 18 subjects with facial asymmetry with surgical indication and observed at the Division of Oral and Maxillofacial Surgery of the Universidad de La Frontera. In all of them the grade of facial asymmetry and the relation in median line of the maxillary and mandibular teeth was evaluated using the t student test considering p value < 0.05; all the evaluations were executed using 2D photography of the face and tooth obtained with standardized conditions. In all the subjects we observed dental asymmetry with almost 7 mm from the median line; statistical relations between dental asymmetry and facial asymmetry. It is concluded that in subjects asking for dental asymmetry treatment a facial evaluation is necessary in view of the relation with skeletal facial deformity.

Evaluation of mandibular condyles in children with unilateral posterior crossbite

The relationship of mandibular condyle dimensions and its association with unilateral posterior crossbite (UPXB) has been suggested in the literature. The purpose of this prospective study was to evaluate mandibular condyles on the left and right sides and between crossed and non-crossed sides in the sagittal and coronal planes, using cone-beam computed tomography (CBCT). Twenty CBCT images of 40 temporo mandibular joints (TMJs) in individuals in mixed dentition phase, which included 9 males (mean 7.9 years) and 11 females (mean 8.2 years), with unilateral posterior crossbite without premature contacts and functional mandibular shifts and with transverse maxillary deficiency. The criteria for sample exclusion included the presence of painful symptoms, facial trauma history, systemic diseases such as juvenile rheumatoid arthritis, mouth opening limitation (< 40 mm), congenital or genetic anomalies, and skeletal asymmetries that may result in TMJ disorders. Dimensional measurements of the condyles between the right and left sides and crossed and non-crossed sides in sagittal and coronal view were made. There was no significant difference between the measurements of the crossed and non-crossed sides in both sagittal and coronal view. These findings suggest that the presence of unilateral posterior crossbite in children with UPXB did not result in changes between the mandibular condyles in the right and left sides or between the crossed and non-crossed sides in the coronal or sagittal plane.

Association between Bolton discrepancy and Angle malocclusions

This study aimed to assess and compare the overall and anterior ratios of tooth size discrepancies in all Angle malocclusion groups. The following null hypothesis (H0) was tested: no difference between tooth size discrepancies (overall and anterior) would be observed among Angle malocclusion groups. The sample comprised of 711 pre-orthodontic treatment study casts of Brazilian patients with a mean age of 17.42 years selected from private practices in Brazil. The casts were divided into 3 groups according to the type of malocclusion: Class I (n = 321), Class II (n = 324), and Class III patients (n = 66). The measurement of the greatest mesiodistal width of the teeth was performed using a centesimal precision digital caliper directly on the study casts, from the distal surface of the left first molar to the distal surface of the right first molar. The overall and anterior ratios between the maxillary and mandibular teeth were evaluated using Bolton’s method. The following statistical tests were applied: chi-square, independent t-test, and one-way ANOVA. Results showed that all Angle malocclusions groups exhibited a ratio compatible with those recommended by Bolton. With respect to the overall and anterior ratios among the malocclusion groups, no statistically significant differences were found. The null hypothesis was accepted because the results showed no differences in the overall and anterior ratios of tooth size discrepancies among different Angle malocclusion groups.

Transverse effect of Haas and Hyrax appliances on the upper dental arch in patients with unilateral complete cleft lip and palate: A comparative study

Objective: The aim of the present study was to evaluate the transverse effect of rapid maxillary expansion in patients with unilateral complete cleft lip and palate while comparing the Haas and Hyrax appliances. Methods: The sample consisted of 48 patients divided into two groups: Group I - 25 patients treated with modified Haas appliance (mean age: 10 years 8 months); and Group II - 23 patients treated with Hyrax appliance (mean age: 10 years 6 months). Casts were taken during pre-expansion and after removal of the appliance at the end of the retention period. The models were scanned with the aid of the 3 Shape R700 3D scanner. Initial and final transverse distances were measured at cusp tips and cervical-palatal points of maxillary teeth by using the Ortho Analyzer(tm) 3D software. Results: The mean expansion obtained between cusp tips and cervical-palatal points for inter-canine width was 4.80 mm and 4.35 mm with the Haas appliance and 5.91 mm and 5.91 mm with the Hyrax appliance. As for first premolars or first deciduous molars, the values obtained were 6.46 mm and 5.90 mm in the Haas group and 7.11 mm and 6.65 mm in the Hyrax group. With regard to first molars, values were 6.11 mm and 5.24 mm in the Haas group and 7.55 mm and 6.31 mm in the Hyrax group. Conclusion: Rapid maxillary expansion significantly increased the transverse dimensions of the upper dental arch in patients with cleft palate, with no significant differences between the Hass and Hyrax expanders. .

Objetivo: avaliar o efeito transversal na arcada dentária superior do procedimento de expansão rápida da maxila em pacientes com fissura transforame incisivo Aunilateral, comparando os expansores tipo Haas modificado e de Hyrax. Métodos: a amostra constou de 48 pacientes divididos em dois grupos: grupo I, 25 pacientes que utilizaram o aparelho expansor tipo Haas modificado, com média de idade de 10 anos e 8 meses; e grupo II, 23 pacientes que utilizaram o Hyrax, com média de idade de 10 anos e 6 meses. Modelos de gesso foram realizados na fase pré-expansão e após 6 meses de contenção, após a remoção do aparelho. Os modelos foram digitalizados com auxílio do scanner 3Shape R700 3D e as distâncias transversais iniciais e finais foram medidas entre as pontas de cúspides e pontos cervicopalatinos de dentes superiores pelo método digital no software OrthoAnalyserT 3D. Resultados: a média de expansão obtida entre as pontas de cúspides e entre os pontos cervicopalatinos, respectivamente, para a distância intercaninos, foi de 4,80mm e 4,35mm para o Haas e de 5,91mm e 5,91mm para o Hyrax; 6,46mm e 5,90mm para os primeiros molares decíduos ou primeiros pré-molares no grupo Haas, 7,11mm e 6,65mm no grupo Hyrax; e 6,11mm e 5,24mm para os primeiros molares no grupo Haas e 7,55mm e 6,31mm no grupo Hyrax. Conclusão: o procedimento de expansão rápida da maxila produziu aumentos significativos das dimensões transversais da arcada dentária superior em pacientes com fissura, sem diferenças significativas entre os expansores Haas modificado e Hyrax. .

Skeletodental diagnosis using a geometric morphometric approach / Diagnóstico dentoesqueletal mediante la aplicación de un enfoque morfométrico geométrico

In orthodontics and maxillofacial surgery, dentoeskeletal diagnosis is essential for treatment planning. Traditionally, this diagnosis is carried out using cephalometric analysis based on the comparison of distances and angle measurements. While this method successfully discriminates within group extreme types of malocclusions, it usually does not distinguish the intermediate ones, which leads to different diagnoses for the same phenotype. Moreover, the linear nature of cephalometric data does not allow to partition shape and size components. In order to study the variation of dentoskeletal pattern in Chilean population, in the present study standard methods of geometric morphometrics to a sample of 150 lateral telerradiographs of classes I, II division 1 and III were applied. We found that classes I, II and III show statistically significant differences associated, to a greater degree, with a sagittal maxillo-mandibular relationship, and to a lesser degree with a vertical growth pattern, allowing positive discrimination of intermediate phenotypes. We conclude that tools of geometric morphometrics constitute a complementary and effective approach to address unresolved problems associated with conventional cephalometric analysis

En ortodoncia y cirugía maxilofacial, el diagnóstico dentoesqueletal es esencial para la planificación del tratamiento. Tradicionalmente, este diagnóstico se realiza mediante análisis cefalométricos basados en la comparación de distancias y ángulos. Si bien este método discrimina correctamente los tipos de maloclusiones extremas, por lo general no distingue los tipos intermedios, lo que lleva a enunciar diagnósticos diferentes para el mismo fenotipo oclusal. Además, la naturaleza lineal de los datos cefalométricos no permite la partición de los componentes de tamaño y forma. Con el objetivo de estudiar la variación del patrón dentoesqueletal en la población chilena, aplicamos metodología estándar de morfometría geométrica a una muestra de 150 telerradiografías laterales de clases I, II división 1 y III. Encontramos que las clases I, II y III muestran diferencias estadísticamente significativas asociadas, en un grado mayor, con la relación sagital máxilo-mandibular, y en un menor grado, con el patrón de crecimiento vertical, permitiendo una discriminación correcta de los fenotipos intermedios. Concluimos que las herramientas de morfometría geométrica constituyen un enfoque complementario y eficaz para hacer frente a los problemas no resueltos por el análisis cefalométrico convencional

Clinical evaluation of dental alignment and leveling with three different types of orthodontic wires

INTRODUCTION: A wide variety of orthodontic wires made of different alloys is available to be used in orthodontic practice and may produce different clinical responses during tooth movement. OBJECTIVE: This research evaluated the alignment and leveling of lower dental arches after the use of three types of orthodontic wires. METHODS: A sample of 36 patients was randomly divided into 3 groups: stainless steel, multistranded steel and superelastic nickel-titanium, according to the first leveling arches used. In order to observe differences in tooth position and axial inclination of the lower incisors, all patients had lateral cephalometric radiographs taken before the insertion of the first arches and 2 months later. The irregularity index and the curve of Spee were measured, compared between groups and considered influential on the proclination of incisors during the initial phase of alignment and leveling. The Reflex microscope was used to measure the irregularity index, whereas the ANOVA analysis of variance was used to verify differences between groups with regard to the degree of dental alignment and leveling. RESULTS: There were significant differences between groups only at T2 for the irregularity index. CONCLUSION: The NiTi and multistranded steel wires showed greater aligning capacity when compared with stainless steel wires.

INTRODUÇÃO: uma grande variedade de fios ortodônticos, compostos por diferentes ligas, está disponível para utilização ortodôntica, podendo gerar respostas clínicas diversas, durante a movimentação dentária. OBJETIVO: este trabalho visa a avaliar o alinhamento e nivelamento das arcadas dentárias inferiores, após a utilização de três tipos de fios ortodônticos. MÉTODOS: uma amostra de 36 pacientes foi aleatoriamente dividida em três grupos, de acordo com os primeiros arcos utilizados para o alinhamento e nivelamento: aço inoxidável convencional, aço multifilamentado e de níquel-titânio superelástico. Para se avaliar as diferenças relacionadas ao posicionamento dentário e inclinação axial dos incisivos inferiores, foram obtidas radiografias cefalométricas de perfil, de todos os pacientes, em duas fases do tratamento: antes da inserção dos primeiros arcos e dois meses após a inserção dos mesmos. O índice de irregularidade dentária (IID) e a profundidade inicial de curva de Spee, fatores influentes sobre a projeção de incisivos durante a fase inicial de alinhamento e nivelamento, foram avaliados e comparados intra- e intergrupos. Para a medição do IID, foi utilizado o Reflex Microscope, possibilitando a mensuração do grau de alinhamento e nivelamento dentário em terceira dimensão. A análise de variância (ANOVA) foi utilizada para se avaliar as diferenças intergrupos em relação ao grau de alinhamento e nivelamento dentário. RESULTADOS: diferenças estatisticamente significativas intergrupos somente foram encontradas em T2, em relação ao índice de irregularidade dentária, já que os fios de NiTi e aço multifilamentado apresentaram maior capacidade de alinhamento do que os fios de aço inoxidável convencionais.

Factors related to orthodontic treatment time in adult patients

INTRODUCTION: The length of time that it takes an orthodontist to treat adult patients varies widely. OBJECTIVE: The aim of this study was to investigate how different variables influence treatment time. METHODS: Seventy clinical case reports of successfully treated adult patients were examined. The patients were selected from 4,723 records held by three experienced orthodontists. The influence exerted by the following variables on treatment time was assessed: age, sex, facial pattern, severity of malocclusion (measured by the PAR index), sagittal relationship of canines, type of brackets (ceramic or metal), tooth extractions, missed appointments and orthodontic appliance issues/breakages, the latter being the dependent variable. Assessment was performed by multiple linear regression analysis, followed by the stepwise method with P < 0.05. RESULTS: The number of times a patient missed their appointment (no-show) (R² = 14.4%, p < 0.0001) and the number of appliance issues/breakages (R² = 29.71%, p = 0.0037) significantly affected variability in treatment time, and these two variables together can predict 43.75% (R² total) of the overall variability in treatment time. Other factors, such as canine relationship at the beginning of treatment, bracket type (metal or ceramic), tooth extractions, age at start of treatment, severity of the initial malocclusion, sex and facial pattern had no significant bearing on treatment time. CONCLUSIONS: The duration of orthodontic treatment in adults, when performed by experienced orthodontists, is mainly influenced by factors related to patient compliance. However, several factors which were not included in this study may contribute to variability in orthodontic treatment time.

INTRODUÇÃO: o tratamento ortodôntico de pacientes adultos apresenta grande variabilidade no tempo necessário para sua realização. OBJETIVO: o objetivo desse trabalho foi investigar a influência de diversas variáveis sobre o tempo de tratamento. MÉTODOS: foram examinados 70 casos clínicos, de pacientes adultos, com bom resultado final, coletados em clínicas de três ortodontistas experientes, cujo acervo total inicial era de 4.723 prontuários. A influência das variáveis idade, sexo, padrão facial, severidade inicial da má oclusão (medida por meio do índice PAR), relação sagital de caninos, tipo de braquetes (estético ou metálico), exodontias, faltas às consultas e "quebras" de aparelho, sobre o tempo de tratamento (variável dependente), foram avaliadas por meio da análise de regressão linear múltipla, seguida do método Stepwise, com p < 0,05. RESULTADOS: a quantidade de faltas (R² = 14,04%, p < 0,0001) e o número de "quebras" do aparelho (R² = 29,71%, p = 0,0037) tiveram influência significativa na variação do tempo de tratamento, sendo essas duas variáveis juntas capazes de prever 43,75% (R² total) da variação no tempo de tratamento. Outros fatores, como a relação de caninos ao início do tratamento, o tipo de braquete usado (metálico ou cerâmico), exodontias, a idade ao início do tratamento, a severidade inicial da má oclusão, o sexo do paciente e o padrão facial não tiveram influência significativa sobre o tempo de tratamento. CONCLUSÃO: a duração do tratamento ortodôntico em adultos, quando realizado por ortodontistas experientes, sofre influência, principalmente, de fatores associados à colaboração do próprio paciente. Entretanto, diversos fatores não incluídos nesse estudo podem contribuir para a variação na duração do tratamento ortodôntico.

Rendimiento de la evaluación cefalométrica para el diagnóstico sagital intermaxilar: revisión narrativa / Performance of the cephalometric asessment for sagital intermaxillary diagnosis: a narrative review

Las anomalías dentomaxilares sagitales son entidades clínicas altamente prevalentes, que afectan entre un 20 por ciento y un 40 por ciento de la población; en un gran porcentaje se deben a problemas esqueletales máxilo-mandibulares, y se caracterizan por alteraciones del resalte incisivo. Su relevancia radica en que cuando sus manifestaciones son severas, éstas generan alteraciones morfológicas que traen consecuencias funcionales, estéticas y psicológicas, tanto en niños como en adultos. La evaluación cuantitativa de las relaciones sagitales intermaxilares se realiza preferentemente con cefalometría, a través de mediciones que constituyen indicadores diagnósticos. Existen numerosos índices para la clasificación sagital intermaxilar, sin embargo, la información respecto de su valor diagnóstico es escasa, en términos de la sensibilidad y especificidad asociadas al uso de ellos. La presente revisión narrativa tiene por objetivo analizar el rendimiento de la evaluación cefalométrica como herramienta diagnóstica para la medición de la relación sagital intermaxilar en términos de sensibilidad y especificidad. En la actualidad no existe una sola prueba que reúna todas las características ideales para determinar con precisión si un individuo presenta una alteración sagital esqueletal. La información disponible referente a las propiedades de especificidad y sensibilidad de las mediciones cefalométricas sagitales intermaxilares como indicadores diagnósticos es escasa. Entre ellas, el ángulo ANB constituye una herramienta adecuada, simple y válida para determinar estas desarmonías. El uso de pruebas diagnósticas cefalométricas para la evaluación sagital intermaxilar en individuos en crecimiento debe considerar la naturaleza dinámica del desarrollo craneofacial.

Sagittal intermaxillary anomalies are highly prevalent clinical entities that affect between 20 percent and 40 percent of the population. The origin of a high percentage of them relies on skeletal alterations of the jaws, which are characterized by the presence of an abnormal overjet. Their relevance becomes evident when their manifestations are severe, as they generate morphologic alterations that bring functional, aesthetic and psychological consequences both in children and adults. The quantitative evaluation of the sagital intermaxillary relationships is done preferably with cephalometry, through measurements that represent diagnostic indicators. There are numerous indices used for intermaxillary sagital classification, nevertheless, the information about their diagnostic value is limited, in terms of the sensibility and specificity associated with their use. The aim of the present narrative review is to analyze the performance of the cephalometric evaluation as a diagnostic tool for the measurement of the intermaxllary sagittal relationship in terms of sensibility and specificity. At present, no single cephalometric test assembles all the ideal characteristics to determine accurately if an individual presents a sagittal discrepancy. The available information related to the properties of specificity and sensitivity of the sagital intermaxillary cephalometric measurements as individual diagnostic indices is scarce. Among them, the ANB angle constitutes a suitable, simple and valid tool to determine these disharmonies. The use of cephalometric diagnostic tests for the sagittal intermaxillary evaluation in growing individuals must consider the dynamic nature of craniofacial development.